Description
- Connector: XLR/TRS combo input (Mic via XLR only)
- Dynamic Range: 108 dB (A-Weighted)
- THD + N: <0.01%
- Noise EIN: >-110 dB (A-Weighted)
- Maximum Input Level: +1.5 dBu
- Gain Range: 50 dB
- Frequency Response: 20Hz – 20kHz (+/- 0.1 dB)
- Input Impedance: 600Ω
- Connector: XLR/TRS combo input (Line via TRS only)
- Dynamic Range: 108 dB (A-Weighted)
- THD + N: <0.01%
- Maximum Input Level: +16 dBu
- Gain Range: 24 dB
- Frequency Response: 20Hz – 20kHz (+/- 0.1 dB)
- Input Impedance: 20kΩ
- Connector: XLR output
- Frequency Response: 20Hz – 20kHz (+/- 0.1 dB)
- Output Level: Fixed +10 dBu
- Input Impedance (Unbalanced): 100Ω
- System Type: 2-way active ported loudspeaker
- Drivers: Low-Frequency: 8.0” (203 mm) driver, 1.4” (35.5 mm) voice coil High-Frequency: 1.0” (25 mm) titanium-diaphragm compression driver, 1.0” (25 mm) voice coil
- Amplifier: 300 watts (peak), Class D power
- Horn Coverage: 90º horizontal x 60º vertical (nominal)
- Signal-to-noise ratio: >100 dB
- Frequency Response: 75 Hz – 20 kHz (-3 dB)
- Max SPL: 114 dB @ 1 m
- Equalization: Contour switch with low- and high-frequency +3 dB boost
- Connectors: (1) XLR/TRS input (Line/Mic), (1) XLR/TRS output, (1) IEC power cable input
- Controls: Power switch, channel volume control knobs
- Indicators: Clip limiter LED
- Bluetooth Version: 5.0 Profiles: A2DP, AVRCP
- Power Connection: IEC Voltage: 100–240 V, 50/60 Hz Fuse: T2AL/250V Consumption: 150W
- Protection: Thermal, overload analog limiter/compressor
- Enclosure: Injection-molded polypropylene, multi-angle for main or monitor applications, metal grille, rubber feet, 1 handle on top
- Mounting/Installation: Standard 36 mm pole socket, wedge monitor
- Dimensions (height x width x depth): 16.6” x 10.7” x 9.9” 422 x 272 x 251 mm
- Weight: 13.0 lb 5.9 kg
